Copy of REASONS BEHIND WHY POLYJACKING IS SUPERIOR TO MUDJACKING

Polyjacking and Mudjacking are both used for concrete leveling purposes. Though the tasks of both solutions are the same, but there are some differences. Polyjacking is comparatively much better than Mudjacking. As we know, polyjacking is expensive, and you may think that is the reason for its superiority, but it’s not like that. So Why Polyjacking Is Superior to Mudjacking? Just go through the article and get in-depth information in a few minutes.

WHAT ARE THE DIFFERENCES BETWEEN POLYJACKING AND MUDJACKING?

These two injections are the most known solutions for repairing concrete infrastructures. All these methods are affordable, time-consuming and a better alternative than changing a whole concrete slab. Besides all of the similarities, it is essential to know the differences between them. See the tables next to understand the diversity.

POLYJACKING

• Polyjacking is an advanced method of injection for repairing concrete structures.
• It is expensive but effective, and a long-lasting solution.
• This system is more appropriate for big voids and can be used on various points.
• While using the Polyjacking system it injects a lot of polymer into the hole to fill the concrete.
• This is a lightweight foam but remains solid and strong than Mudjacking.
• You can use Polyjacking on the dam, sinking or moisture places or slabs without any hesitation. 
• Polyjacking can fix small areas like 5-8 inches and you don’t need to make any holes to use it, which is one of the best parts of this process.

MUDJACKING

• It is less expensive but not as durable as Polyjacking.
• Mudjacking is the older method of repairing concrete slabs and structures.
• This solution is made entirely with natural ingredients.
• As this is an older process many of the experts are familiar with this system.
• Mudjacking is extremely heavy and could be a cause for soil compression in future.
• For rough textures, it cannot fill the spaces completely which can be a cause for serious damage.
• It is a low-cost method but you need to repeat the Mudjacking once after 1 or 2 years. As it is a short-term solution.
• Mudjacking is not a waterproof solution and can be a washout in heavy rainfall.

WHY POLYJACKING HAS TAKEN OVER MUDJACKING

In the previous section, we have already shown the difference between both of them and besides all the comparisons, there is something more that will fully answer you on Why Polyjacking Is Superior to Mudjacking? Continue reading  for actual aspects.

ECO FRIENDLY

Polyjacking is non-toxic to surrounding soils. This foam is recyclable and sustainable, which is used by Greenstar insulation. As it creates less mess, you don’t need to clean a lot while using it. Polyjacking is the best for perfect leveling, and you can use this without any tension.

LONG LASTING

If you don’t want to take hassle regularly and wish to have a permanent solution, then Polyjacking is for you. Mudjacking needs to be repaired once in 2 or 3 years, but with the Polyjacking process, you can relax for at least 5 to 6 years. This method increases the stability and solidity of the interface where you will apply it.

WATER AND MOISTURE RESISTANCE

Mudjacking is not stable in heavy rain or moisture places no matter how many times you refill it you have to do it again and again. On the other hand, you can use Polyjacking even in a sinking concrete void. You never need to worry again about that.

SHORT HEALING TIME

You need to wait at least 24 to 36 hours to cure the surface of Mudjacking. At that time, if somehow it is damaged, then you need to do it further. However, while you use the Polyjacking method it will take only a few hours to get set. It is a very easy and fastest recovery solution to use on any surface.

SCIENTIFICALLY PROVEN

To expand on the soil when it is applied, polyjacking depends on a chemical reaction that improves the stability of nearby materials. According to research by the International Association of Polyhacking Specialists about 87% of homeowners are satisfied with the results of the polyjacking process. It has a high percentage of polyurethane which gives good support for healing, stability, and durability.

EASY TO USE

While you intend to use Mudjacking to heal the space you need to make 2 or 3 holes to proceed, otherwise it will not be stable and durable. But with polyjacking you just need to fill in where exactly it is needed. You don’t even need to worry again because it will be much stronger than earlier.

COST FRIENDLY

Yes, that’s true. Polyjacking is more expensive than Mudjacking, but cheap can be costly sometimes, and it is proven in this article. As we know Polyjacking is made of a chemical mix so it is natural to be a little bit expensive. If you apply Mudjacking you need to repair them several times. So from that perspective, it is better to use the Polyjacking method. Therefore, on average you may need to spend $5 to $25 per square foot depending on the surface area. 

LIGHTWEIGHT

As we know Mudjacking is made of natural products so the weight per cubic foot could be 100 pounds. Therefore, on the same size Polyjacking load is 2 pounds which will not increase the extra load on the structure. If your structure is on weak soil then this is best to use the Polyjacking method.

There are several reasons we have already discussed on why Polyjacking is superior to Mudjacking. But the most important thing that we should consider about our environment. As humans everyone tries to use eco-friendly products and Polyjacking is one of them. Besides that, this method is scientifically proven, and it is a long-lasting process to recover cement slabs. Though the price of Polyjacking is a bit higher, we should remember that quality is more important than cost! Stay tuned for more exciting and informative articles in the future.

In summary, polyjacking stands out as the more modern, eco-conscious, and long-term solution for concrete leveling. While the upfront cost is higher, its durability, fast curing time, and resistance to water damage make it a smarter investment—especially for homeowners in Kansas City, Columbia, and throughout Mid-Missouri.

Choosing quality over cost pays off in the long run. Stay tuned for more informative content on home repair and concrete solutions.