Copy of JEFFERSON CITY GARAGE FLOOR LEVELING: WHAT YOU SHOULD KNOW

July 18, 2025

Known as the Missouri state capitol, Jefferson City is home to many, many homeowners who experience uneven garage floors. These are common in the mid-Missouri area because of the area’s unique soil condition. The change in the soil moisture content underneath the garage may shift and make the floor uneven. It will lead to an unsightly and dangerous imperfection. Here, garage floor leveling, also referred to as mudjacking or polyjacking, can solve your problems.


Garage floor leveling is a good choice for floors with visible cracks, uneven areas, holes, or sunken concrete. Leveling and lifting the concrete slabs can extend the longevity of the garage in your home.



So, to know every pinpoint about the garage floor leveling in Jefferson City, MO, keep on reading.

WHY DOES GARAGE FLOOR BECOME UNEVEN IN JEFFERSON CITY, MO?

In Jefferson City, MO, garage floors can be uneven due to the erosion of the soil underneath!

The soil of this city is clay-rich and elastic. The soil tends to expand or contract depending on the moisture content.


When the soil becomes saturated with water, the clay underneath the garage becomes expanded. As a result, the soil starts to lose its strength and allows the slabs to sink as if standing in wet mud.


Moreover, as the concrete is rigid and inflexible, the garage floor starts to crack.

It is common for soil to move in Jefferson City, but the damage due to it in the garage floor leaves behind doesn’t have to be permanent. Trusted floor leveling solutions from experts can easily help resolve such issues.


PolyMagic can be of ultimate assistance with these issues. It is the industry-leading concrete lifting and leveling company.


Our experts bring their expertise not only to Jefferson City but also to other areas, like

  • Columbia, MO;
  • Lake of the Ozarks, MO; and
  • The mid-Missouri area.

No matter whether your garage requires floor lifting, leveling, or floor coatings, just let our experts handle it.

WHY GARAGE FLOOR LEVELING IS IMPORTANT?

Many homeowners think replacing the concrete around your home is the only solution to fix the uneven areas. However, that is not the case. Repairing your concrete is a fraction of the cost to replace. Before moving to the method of garage floor leveling, let’s first get to know the mention-worthy reasons why garage floor leveling is important.


ENSURING SAFETY

One of the main reasons for garage floor leveling is for safety purposes. When the floor of the garage is not even, it becomes very dangerous for the residents and the visitors of your home due to the unexpected tripping hazards.


GETTING RID OF WATER PUDDLE

Another crucial reason to get the garage leveling done in Jefferson City is for the puddling.

An uneven garage is the sweet spot for water puddling. When it rains, the dips fill with water, and puddles are created.


Most notably within the confined area of the house garage, the moisture is likely to stay. Over time, it will lead to cracks, causing additional issues. The same thing can happen in the freezing temperatures of Jefferson City.


That is why the best time to get the garage floor leveling is when you notice even small cracks on the surface.

METHODS OF GARAGE FLOOR LEVELING IN JEFFERSON CITY, MO

If you are experiencing breakage, holes, or unevenness in your garage floor in Jefferson City, there is always a solution for it.


Here are the methods that can be used to level your floor in Jefferson City.


METHOD 1: POLYJACKING

Polyjacking is the industry’s most innovative and effective method for leveling sunken concrete in your house garage.

In this method, a high-density foam named polyurethane is used for leveling up. Here are the three steps of polyjacking.


  • Step 1: Strategically, injection holes are drilled around the areas of your garage where they are sunken. These injection holes are generally tiny and about 5/8″.
  • Step 2: Once the preparation is done and the hoses are in place, polyurethane is used for leveling up.

Typically, it is injected through the drilled holes to fill up the space underneath the concrete slab.


The foam fills all the gaps under the slabs, and the concrete returns to its original place.

  • Step 3: After completion of step 2, the holes are filled using the cement discreetly.

METHOD 2: MUDJACKING


In mudjacking methods, a mixture of sand, soil, and water is used to level the sunken floor.


Here is how it is done:


  • First, holes are drilled directly into the sunken concrete. It allows the specialized mud jack hydraulic pump to push the mud mixture into holes that are drilled.
  • After some time, the mud mixture will harden and will adhere to the soil underlying the garage.



Mudjacking is an old floor-lifting method, and nowadays, used less than Polyjacking. Because Polyjacking is much more reliable, and less weight under your floors.

MAINTENANCE TIPS FOR A LEVEL GARAGE FLOOR

To maintain the integrity of the newly leveled garage floor, here are some of our expert tips.


1. REGULARLY INSPECT FOR CRACKS AND DAMAGE

You should always check the floor of your garage for any cracks and signs of wear.

This small approach will allow you to detect the problem early. Then you can address the minor issues early, even before they become major concerns again.


2. HAVE A PROTECTIVE COATING

It is a very effective way to protect the garage floor of your house from any cracks or damage.


You can use a high-quality protective coating to protect the garage floor from moisture and wear due to daily use.


You can go for Polymagic’s polyaspartic floor coating services for commercial and residential spaces in Jefferson City.


3. PROMPTLY REPAIR ANY ISSUE

If you notice any cracks or damage on the floor of your garage, you should take steps to repair it immediately.


That’s because sometimes this type of small imperfection can quickly make it worse if you don’t address it.


You should always take the expert’s suggestion to address any underlying issues with your house’s garage floor.


It is essential to keep your garage perfectly leveled to ensure safety and durability. So, of course, you can’t take it lightly to let anyone do this important task.


Polymagic is the leader in polyjacking, floor coating, concrete leveling, and lifting around Jefferson City and the mid-Missouri area. Our expert’s state-of-the-art equipment ensures that your garage is perfectly leveled and durable.


So, what to think more about in contact with us. To get in touch with our experts, just call us or through our Contact Us form.

July 21, 2025
CONCRETE LIFTING: A QUICK OVERVIEW & HOW DOES IT WORK?
July 21, 2025
KEY BENEFITS OF LEVEL CONCRETE SURFACES
By Will Stephenson July 21, 2025
WHAT ARE THE DIFFERENCES BETWEEN POLYJACKING AND MUDJACKING?
July 21, 2025
Many of us have seen the transformative before and after pictures of the garage floors that have that WOW factor. The garage floors that look so good you don’t even want to drive your car into them! Well, these aren’t the DIY epoxy floors… trust the experts to coat your garage floors with the polyaspartic process. Among many other benefits, the immediate increase in your home value is worth it! We have seen several DIY epoxy flooring failures, but understand the appeal of trying it. It seems cheaper, easier/less hassle, and *should* have a nice and sleek finished look. However… with all things that seem too good to be true, they are in this case. The floor coating experts at PolyMagic are equipped to offer the best solutions for your concrete flooring upgrades. From man caves and garage floors to patio and pool areas, our polyaspartic garage floor coatings have several advantages compared to the epoxy coatings. Let’s compare Polyaspartic vs. Epoxy Floor Coating : Polyaspartic Garage Floor Coatings won’t peel or flake like the epoxy floor coatings (especially the DIY jobs) Epoxy curing time is length… up to a week…. Polyaspartic only takes about a day (you are able to walk on the surface in SIX hours!) Polyaspartic has evenly distributed color flakes across the flooring – epoxy usually has the base coat show through Polyaspartic is 10x MORE DURABLE than epoxy. This is crucial for areas such as the garage where you have vehicles driving in and out, have oil and chemical spills, etc. Polyaspartic can have a non-slip texture applied, which is ideal for pool or garage areas that experience water, ice, or spills. Check out the project below from a recent customer in Kansas City. The customer wanted to add a sleek and updated look to their existing garage floor. After selecting the Domino flaking look, the project began and within a day, the homeowners had an entirely new space. The team at PolyMagic even came in and repaired the blemished concrete areas to ensure the final product was nice and smooth! Talk about an upgrade – both aesthetically and for home values. PolyMagic also offers temporary storage for homeowners to keep their belongings during the coatings project.
July 21, 2025
PRIMARY CAUSES OF DRIVEWAY SINKING
Show More